# All fields are optional. If omitted, each falls back to an env var, then
# to a default -- same pattern as config.py in the Python reference project
# (SWITCH_HOST / SWITCH_HTTPS / SWITCH_PASSWORD):
#
#   host                 <- HPE1810_HOST                 <- "192.168.2.10"
#   https                <- HPE1810_HTTPS                <- false
#   password             <- HPE1810_PASSWORD             <- ""
#   save_running_config  <- HPE1810_SAVE_RUNNING_CONFIG  <- false
#
# So for the switch as currently configured (no password, plain HTTP, at its
# default IP), an empty provider block is enough:
#
#   provider "hpe1810" {}
#
# The explicit values below are just to show what's available.

provider "hpe1810" {
  host     = "192.168.2.10"
  https    = false
  password = "" # switch currently has no password set

  # If true, "Save Configuration" runs once at the end of this `tofu`
  # invocation, but only if it actually wrote something -- a plan-only run,
  # or an apply where nothing changed, never triggers a save. Left false by
  # default: the config is already source-of-truth as IaC, and saving on
  # every write wears the switch's flash for no real benefit. Flip to true
  # once you actually want changes to survive a reboot/power cycle.
  save_running_config = false

  # hpe1810_port refuses to write to this interface under any circumstances
  # -- protects the switch's uplink/management port. Matches the default,
  # stated explicitly here for clarity. NEVER put this port number in
  # var.ports (see variables.tf).
  admin_port = 24
}