# All 13 read-only extractors are now ported as data sources -- see
# ~/code/experiments/hpe/terraform-provider-hpe1810/internal/provider/data_source_*.go
#
# First write resource: the locator LED. Singleton; Delete resets it to
# Disable (see resource_locator.go for why that's safe here specifically).
resource "hpe1810_locator" "draupnir01" {
  enabled = false
}

# Second write resource: Green Features (EEE power-saving). Singleton;
# Delete resets to factory defaults (see resource_green_features.go).
# Values below match what's currently live on the switch, so the first
# `tofu plan` shows no drift.
resource "hpe1810_green_features" "draupnir01" {
  green_mode          = true
  mode_led_time       = 10
  phy_auto_power_down = true
}

# Third write resource: per-port config, driven by for_each over var.ports
# (see variables.tf). The admin_port (default 24, see provider.tf) can
# never be written by draupnir01 resource regardless of what's in var.ports --
# see resource_port.go's guardAdminPort. Delete disables the port and
# resets Link Speed to Auto (see resource_port.go for why that's safe here).
resource "hpe1810_port" "draupnir01" {
  for_each = var.ports

  interface  = each.key
  admin_mode = each.value.admin_mode
  link_speed = each.value.link_speed
}

# Fourth write resource: System Name/Location/Contact (SysDescription.html).
# Singleton; only these three fields are actually writable on that page --
# see resource_system_description.go. Delete resets all three to "".
resource "hpe1810_system_description" "draupnir01" {
  name     = "draupnir01"
  location = "Lab"
  contact  = ""
}

# Fifth write resource: Time Zone Configuration. Singleton; Delete resets
# to "None" with an empty acronym (see resource_time_zone.go).
resource "hpe1810_time_zone" "draupnir01" {
  zone    = "(GMT+01:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna"
  acronym = ""
}

# Sixth write resource: LLDP Global Mode settings only (LLDPConfig.html's
# per-port Interface Mode table isn't covered -- see resource_lldp_configuration.go).
# Singleton; Delete resets to factory defaults.
resource "hpe1810_lldp_configuration" "draupnir01" {
  transmit_interval     = 30
  transmit_hold         = 4
  reinit_delay          = 2
  notification_interval = 5
}

# Seventh write resource: Daylight Saving Time. Singleton; only "Disable"
# and "Recurring" modes are supported (see resource_daylight_saving_time.go
# and client/dst_config.go -- NonRecurring uses a different field set and is
# rejected). Delete sets mode to Disable. Values below match what's
# currently live (standard EU DST rule).
resource "hpe1810_daylight_saving_time" "draupnir01" {
  mode           = "Recurring"
  start_week     = 5
  start_day      = "Sun"
  start_month    = "Mar"
  start_hour     = 2
  start_minute   = 0
  end_week       = 5
  end_day        = "Sun"
  end_month      = "Oct"
  end_hour       = 3
  end_minute     = 0
  offset_minutes = 1
  offset_acronym = ""
}

# Eighth write resource: Flow Control (SwitchConfig.html). Singleton;
# Delete resets to Enable (factory default).
resource "hpe1810_flow_control" "draupnir01" {
  enabled = true
}

# Ninth write resource: Port Mirroring global settings only (FDBConfig.html's
# per-source-port Direction table isn't covered -- see resource_port_mirroring.go).
# Singleton; Delete disables mirroring and clears the destination port.
resource "hpe1810_port_mirroring" "draupnir01" {
  enabled          = false
  destination_port = ""
}

# Tenth write resource: link aggregation (LAG). Genuinely different shape
# from everything above -- a named sub-entity with create/delete, not a
# singleton or a fixed for_each set. See resource_trunk.go and
# client/trunk.go for the full write-protocol writeup, including the
# "including the Create-section fields in a delete request creates ANOTHER
# trunk as a side effect" quirk. admin_mode/static_capability are read-only
# here (not independently verified writable). Delete removes the trunk.
# No trunk declared by default -- add one here when you actually want to
# bond ports, e.g.:
#
#   resource "hpe1810_trunk" "unraid" {
#     name    = "unraid"
#     members = ["5", "6"]
#   }

data "hpe1810_system_description" "draupnir01" {}
data "hpe1810_network_setup" "draupnir01" {}
data "hpe1810_port_summary" "draupnir01" {}
data "hpe1810_lldp_statistics" "draupnir01" {}
data "hpe1810_buffered_log" "draupnir01" {}
data "hpe1810_mac_table" "draupnir01" {}
data "hpe1810_trunk_status" "draupnir01" {}
data "hpe1810_loop_protection_status" "draupnir01" {}
data "hpe1810_dual_image_status" "draupnir01" {}
data "hpe1810_clock" "draupnir01" {}
data "hpe1810_sntp" "draupnir01" {}
data "hpe1810_log_configuration" "draupnir01" {}
data "hpe1810_backup_manager" "draupnir01" {}